Misclose

The use of the ratio of the linear misclose to the total length traversed as an expression of traverse accuracy has been known to be theoretically weak since sampling distributions are unknown.

The program also calculated the misclose ratio as a check to see if the garden measurement data had been taken accurately and entered correctly.

A misclose assessment should be undertaken to verify that forward and backward runs of a levelling travers, including any individual bays, are within the maximum allowable misclose.

Of these papers it is interesting to note that the shape profile analysed according to the Anwar and Binnie methods contained minor miscloses under static conditions, whereas the Harrison computer-orientated method appears to be satisfactory.

Having computed three miscloses from three initial guesses, Newtonian iteration is used to improve the guessed values in a semi-automatic manner.

This process was repeated for all nodes along the column and the resulting deflection (misclose) at the top of the column of -0.298 mm indicated that the chosen trial value of N was incorrect.

In some surveys angles of a traverse are known to misclose up to 5° (five degrees) but the traverse is adjusted.

Since the outer loop also contains the blundered angle, it should come as no surprise that it also miscloses by 2 degrees.

The traverse miscloses by +0.44 ft in latitudes and +0.20 ft in departures. Consequently, to achieve closure, (+) latitudes must be reduced, (-) latitudes must be increased, (+) departures must be reduced, and (-) departures must be increased.

Looked at as a single structure (Figure 2), the Tethyan Torsion Zone is a belt generally 1000 km or more wide, and a total length of some 40,000 km, which creeps southwards as it is followed eastward round the globe, so that the zone miscloses its own beginning by about 60° (some 7000 km.)

Another definition can be sometimes more useful: consider a closed loop which becomes broken and misclosed due to anholonomic transformation.

when the phases of both circuits synchronize and prevents the misclosing when the system disturbance is not in a proper condition to close.

Once more the ordinary person's common sense is roughly adequate to understand that since hydraulically misclosed doors leak or " bleed" continually, the chances of a catastrophic door blow-out and subsequent decompression are lessened.

Environment type: temperature, humidity, electromagnetic, current exceed the threshold or change too much; typical misoperations such as mis-opening, misclosing, etc.

If you fail to qualify the client's needs well, you may make a poor presentation." "Or misclose the customer," commented another seller.