Underhead

wiser discretions, that have the thread of reason to conduct them, offend without a pardon; whereas underheads may stumble without dishonour.

Well, booby, what's that to you, underhead?

Data in the column headed "Underhead" are demerit ratings related to the degree of darkening of the underhead. A rating of 0 indicates a completely black underhead, while a rating of 10 indicates a completely clean underhead.

The valves were removed from the engine at 25 hour intervals and zyglo inspected for cracks in the underhead and stem.

Other important tasks accomplished were the removal of the neutron shield tanks, decontamination of the reactor building air coolers, closed-circuit television inspection of the 282 ft. elevation, raising and parking of all eight axial-power-shaping rod leadscrews, and first steps toward a complete characterization of radiological conditions of the reactor-vessel underhead.

The shape of the underhead is very important: it determines the tightness of the reversed bucktail and the shape of the finished head.

However, if the bolt or screw is the flat-top design (where the top is flat and the underhead is chamfered for a countersunk fit) , length always denotes overall length, from top of the head to the tip of the threads.

So far as absolute strength for carying the load is concerned, this reduction of area need cause no alarm, but the effect of the indentation of the underhead or base of the rail is a different and I fear a serious matter, because it is well known, that it indent a piece of steel and subject it to a blow produces immediate fracture […],

The bolt holes are then redrilled and a good square-ended, but slightly shortened, rail with a full underhead section for the splice bar is obtained at slight cost, that will give good service when relaid.

In a rail splicing structure, a rail and splice bars disposed for cooperative bolting assembly therewith , the rail having a new underhead formation as compared with a standard rail of substantially equal cross-sectional area, said new underhead formation comprising outer bottom corner fillets extending downwardly and inwardly from approximately the gauge line […]

I think prices would go up, for I know something of the importance of overhead and underhead cost as affecting the price of the goods you have to sell.

Mr. M. Caflisch of the Bronx Consumers' Ice Co., New York City, was requested to address the convention and spoke briefly on the necessity for knowing the actual total cost of manufacturing and handling ice as well as of harvesting, storing and selling ice, for he thought if ice men really understood how much the "overhead" and "underhead" cost is, they would hesitate at the price cutting that was so evident in some sections during the past Summer and prevented dealers in those sections from making a reasonable profit in spite of the excellent season which they enjoyed.

Periodically appraise the organization structure to determine what adjustments are needed to improve operating effectiveness and to reduce total costs, both overhead and underhead.

But I have expenses to consider. Do you know what they are? And then there's my overhead and my underhead and my in-betweens.

In preparation for reactor pressure vessel head lift, an underhead radiation survey was performed on Dec. 16 , 1982 , to determine radiation levels in the area between the top of the plenum assembly and the reactor vessel head .

With large underhead radius shown to be optimum in a given case, the judgment must be made as to whether the valve weight increase is justified in improved engine performance.

The underhead shape on valves can come in all angles which are grouped into nailhead (almost flat) and tulip.

To prevent a bolt from breaking at its underhead area, an underhead radius must be provided.

The Missouri Pacific Railway agrees that there may be an underhead crossing of its tracks north of the Union Depot, at such point as may be most convenient to both parties, and corresponding with the underhead crossing of the Texas and Pacific Railway, above mentioned;

That about midway between the old crossings it proposes to construct an undergrade way to join the Wenrick pike on the north side of said railroad; that said railway company will turn the Stoner road west on a new way and compel users of the Stoner road, going north, to turn west 772 feet to the underhead way,m pass out on the underhead way 209 feet to the Wenrick pike, then go east on the Wenrick pike 706 feet, where they again strick the Stoner road;

We further find that the viaduct or overhead plan will be more economical than the subway or underhead plan.

On August 7, 1929, complaint was filed with the Corporation Commission by the Board of County Commissioners of Oklahoma County asking for underhead crossing on Grand Boulevard on East Reno, in Oklahoma City, where same intersects the Frisco's right-of-way, stating that the present trestle has opening of 13 ft. between bent, making said underhead crossing dangerous, […]

It should almost be a lighting axiom therefore, that brilliant underhead light sources are taboo for esthetic purposes.

Throughout Good-Fellas, Scorsese is at great pains to remind us that we are watching a movie —there are freeze frames, over- and underhead angles, expressionist lighting (a funeral scene is scarlet), and at least one moment during which a character addresses us directly.

Overhead and underhead lighting, especially when the lighting is hard, and is the sole illumination (i.e., no fill lights), can cast actors in an "ominous light." distorting their faces with creepy shadows, or hiding their eyes (the windows to the soul) in darkness.